ELEVATE Formflash Tape

Elevate your roofing and waterproofing projects with the versatile Elevate Formflash Tape. Available in both 9" and 12" widths, this innovative product features uncured Formflash, factory laminated to Quickseam Tape. It is specifically designed to provide a seamless solution for flashing inside and outside corners, pipes, penetrations, drain outlets, and any other complex or awkward details. With its superior adhesion and flexibility, Elevate Formflash Tape ensures a durable and reliable seal in even the most challenging conditions..

Key Features

• Exceptional Moisture Resistance: Protects against water infiltration, ensuring the longevity and integrity of your roofing system.
• Superior Heat and Cold Resistance: Maintains performance and flexibility across a wide range of temperatures, from extreme heat to severe cold.
• Excellent Green Tack: Provides immediate adhesion, reducing the need for prolonged pressure application and ensuring a quick and efficient installation process.
• Excellent moisture resistance to prevent water penetration.
• Outstanding heat and cold resistance for durability in varying climates.
• Immediate green tack for efficient and quick application.
  
• Price per Linear Metre

Technical Specifications

• • Minimum Application Temperature: 14 °F (-10 °C)
  • Drying Time: 30 to 90 minutes, varies with temperature and amount applied
  • Storage Temperature: 32 °F to 104 °F (0 °C to 40 °C)
  • Shelf Life: 5 years in original, well-sealed container
  • Clean-Up: Use petroleum solvents (petroleum spirits, Xylene, etc.)
  • Coverage Rate:
    • Porous substrates: 0.5 to 1.0 US gal/100 ft² (0.2 to 0.4 L/m²)
    • Non-porous substrates: 0.25 to 0.6 US gal/100 ft² (0.1 to 0.25 L/m²)
  • Typical Properties:
    • Colour: Red
    • Specified Gravity: 77 °F (25 °C) 7.8 lb/gal (0.94 kg/L)
    • Solids Content: 45%
    • Brookfield Viscosity: 77 °F (25 °C) 300-600 cP
    • Volatile Organic Compound (V.O.C) Content: 240 g/L

  Application Instructions

  1. Do Not Thin: Ensure primer is used at full strength.
  2. Temperature: Apply when temperatures are expected to rise, starting from 14 °F (-10 °C).
  3. Stir Well: Stir thoroughly before and during application.
  4. Drying: Allow 30 to 90 minutes for drying; it should be tacky but not messy.
  5. Surface Prep: Clean surfaces thoroughly to remove dust and contaminants.
  6. Application: Use a brush, roller, or airless sprayer for even coverage.
  7. Timely Installation: Install membranes the same day as primer application.

  Storage and Handling

  • Store between 32 °F and 104 °F (0 °C to 40 °C).
  • Avoid damage during transport and handling.
  • Store in original packaging, no more than two pallets high.
  • Protect from weather if temporarily stored on-site.